BUY WITH YOUR HOME IN MIND
Choose by how you will empty the water
Choose the Midea Cube if you want a larger bucket and fewer trips to empty it. Choose the Frigidaire if you prefer pulling a bucket out of the front instead of lifting the machine off its bucket. If you will use a gravity hose, that difference matters less.
This comparison covers the no-pump Midea MAD50S1QWT and Frigidaire FHDD5034Y1. Both have a 50-pint daily water-removal rating. That rating describes moisture removal under test conditions, not how much water the bucket holds or a promise of equal results in your room.
A larger bucket comes with more lifting
The Cube has the larger bucket, as the comparison table shows. At the same water-collection rate and fill level, it can go longer between emptying trips.
But the Cube’s design takes more handling: you lift the upper machine off the bucket before carrying the water away. A full bucket is heavy. Its selectable fill levels let you stop collection earlier if a smaller load is easier to carry.
The Frigidaire’s front bucket is a simpler fit if you want to leave the main body in place. Allow space in front to pull it out. Neither choice makes a full bucket light, so think about the route to your sink as well as the number of trips.
Storage size is not operating size
The Cube nests into its bucket for storage. The dimensions in the comparison table describe that nested position. When collecting water in the bucket, it must be raised into its operating position.
The Frigidaire keeps its upright shape during use and storage. Its listed body dimensions are easier to compare with the space where it will run, but you still need room around the vents and access to the bucket.
If you are fitting a machine beside furniture, measure the working setup. Do not choose the Cube on the assumption that its nested height is its height during bucket collection.
A lower drain can reduce bucket work
Both selected models support gravity drainage and neither has a built-in pump. A secure hose that runs downhill to a suitable drain can remove the need for routine bucket emptying.
That makes the Cube’s bucket advantage less important. Compare the available space, hose route and controls instead. If the water must travel upward to a sink, read our pump vs no-pump guide before choosing either model.
Controls and reviews do not settle every difference
Both models offer humidity settings and app control. The Cube adds selectable bucket fill levels; the Frigidaire offers more fan-speed choices and a timer.
Review feedback raises reliability concerns for both. Cube feedback is mixed on noise and durability, while Frigidaire feedback includes Wi-Fi connection problems. These themes are useful cautions, but do not establish which exact model will last longer or sound quieter in your room.
Which fits your routine?
The Cube makes sense when you will use the bucket, want more time between trips and are comfortable lifting the machine off it. The Frigidaire makes sense when front-bucket access suits you better and you prefer a conventional upright body.
If you have a suitable lower drain, either can avoid most bucket carrying. Neither is the right pump choice for an uphill drain. For more options, our large-room and basement guide compares four models with different drainage setups.
Before deciding, our guide to dehumidifier running costs shows how power, time and your electricity rate affect the bill.